A selection of replacement pumps for pressure washers which operate at 1450rpm. You will need to check the power requirements and shaft size and type of the engine to ensure these pumps will fit.
Annovi Reverberi oil seal kit. 7 seals total (3 piston seals + 4 other seals) - for XWL36.15, XWL50.15, RG21.20, XWF30.20, XWT21.20, WHW32.20, WHW15.20, WHW21.15, XWL41.20, SHP22.50, SHP15.50 pumps
Annovi Reverberi valve kit for AR RKV55G40
Annovi Reverberi Valve kit 1864, this item is the correct Valve kit for the XMT11.11 MP, HYD-XM15.15 MP, HXM15.15 MP, XMV3G30, XTV3G16, XTV3G22, XMV4G30, XT13.15 and XM15.15 pressure washer / high pressure water pumps and 70-030 and 70-031 Power Washers.
RC12.17 Annovi Reverberi (AR) 24mm Solid Shaft Pressure Washer Pump delivering 12 litres per minute at 170 bar / 2465 Psi. This is a 1450rpm pump that is ideal for electric motors and can be coupled to various types of motors, directly or with flexible joint. It features a die-cast aluminium alloy pump body.
The W154M is a 44 series pump from Interpump, producing 14 litres per minute at 150 Bar / 2175 Psi. Brass manifold, 1/2" Bsp Female inlet and 3/8" BSP Female outlet, it requires 5.5 Hp / 4.04 kW to power it, and has a speed of 1450 rpm. 24mm shaft
XT11.11 Annovi Reverberi has a 24mm solid shaft, runs at 1450 rpm and produces 11 litres per minute at 110 bar / 1595 Psi. You will need a 3HP motor to run this pump at full pressure and it is great for use with electric motors.
XT13.12 Annovi Reverberi (AR) 24mm Solid Shaft Pump 1450RPM 100 Bar 1450PSI. This is ideal for electric motors to drive it, you will need a motor of 3.3HP to run this at full pressure, it offers 13 litres per min flow rate @100 bar or 1450psi
Annovi Reverberi XT13.15 Pressure Washer Pump with a 24mm solid shaft for use at 1450rpm, that outputs 13 Litres per minute at 150 Bar / 2200 PSI. It has a die-cast aluminium alloy body and 3-piston alternating volumetric pumps. Ideal for use in for use on cleaning units and industrial systems. Can be coupled to various types of motors, directly or with flexible joint.
XM15.15 Annovi Reverberi 24mm solid shaft pump. 15 Litres flow rate with 150 Bar / 2200 Psi running at 1450 rpm. The pump shaft in pressed high-strength steel & it offers rear cover with oil drain outlet and oil sight glass. Cap with dipstick for oil level on body pump.
The W154MV is a 44 series pump from Interpump, producing 14 litres per minute at 150 Bar / 2175 Psi. Brass manifold, 1/2" Bsp Female inlet and 3/8" BSP Female outlet, it requires 5.5 Hp / 4.04 kW to power it, and has a speed of 1450 rpm. 24mm shaft, features an integrated unloader and chemical injector
The Interpump 59 Series E3B2515M is a professional-grade high-pressure pump designed for demanding industrial and commercial cleaning applications. Delivering up to 250 Bar at 15 L/min and operating at 1450 RPM, it features a durable nickel-plated brass manifold, 24mm male shaft, and standard BSP inlet/outlet connections for reliable performance and long service life.
RK15.20 Annovi Reverberi 24mm Solid Shaft Pump 3000PSI or 200 Bar. It is a 1450rpm pump that is ideal for electrical motors, it will deliver up to 15 litres per min so has great cleaning power.
The RK21.20 Annovi Reverberi is a 200 Bar / 2900 Psi pump which can be used at either 1000rpm (ideal for Tractor Power Take-off) which will output14lpm - or 1450rpm, which will output 21lpm (ideal for use with electrical motors or with a petrol engine using a gearbox). The pump body and cover in die-cast aluminium alloy.
The RW21.20 Annovi Reverberi (AR) has a 24mm solid shaft and 21 litres per minute flow rate, with 200 Bar / 2900 Psi and running speed of 1450RPM. There are various types of gasket system available depending on the application. Intake and delivery valves have plugs for easier maintenance.
RK15.28 Annovi Reverberi 24mm Solid Shaft Pump 280 Bar 4000PSI 1450RPM pump to be driven by electrical motors, this pump delivers up to 15 litres per min and the pump body and cover are in die-cast aluminium alloy
The SA154 is 44 series pump from Interpump coupled with the RS99 Gearbox, producing 14 litres per minute at 150 Bar / 2175 Psi. Brass manifold, 1/2" Bsp Female inlet and 3/8" BSP Female outlet, it requires 5.5 Hp / 4.04 kW to power it, suitable for use with the Honda GX200
Thus unit combines an Interpump EVO 3 series pump with an RS500 Gearbox. Made with Nickel-plated brass, it is suitable for being driven by a Honda GX390, it outputs 15 litres per minute at 250 Bar / 3625 Psi of pressure. 1/2" BSP Female inlet, 3/8" BSP Female outlet. Replacement assembly for the E2T15250PHR
The Annovi Reverber XHW11.17 is a high-temperature pump with solid shaft suitable for water up to 85°c, A 11 litres flow rate and offering 170 bar or 2500PSI, the running speed of the pump is 1450RPM. You will need a 5HP motor to run at full pressure.
Pump and gearbox assembly, the E3B151M pump and RS500 gearbox - provides 15 litres per minute at 150 Bar / 2175 Psi max pressure. Requires 10 Hp / 7.35 kW of power. Fits a 1" / 25.4mm hollow shaft with a SAE J609 A-B Flange. Suitable for Honda GX240K1QX engines. The pump has a 3/4" BSP Female inlet, M22 male outlet on the VRT3 unloader valve with a return to tank outlet, and featues an inline inlet filter, return to tank bypass barb and easy-start valve.
The RHW13.12 High Temperature 85°c Annovi Reverberi Solid Shaft Pump 13Lts Flow @ 120 Bar 1750PSI 1450RPM, Has piston reciprocating pumps for use on cleaning units and industrial systems operating with hot water. Pump body.
Pump and gearbox assembly - provides 15 litres per minute at 250 Bar / 3625 Psi max pressure. Requires 9.7 Hp / 7.13 kW of power. Fits a 1" / 25.4mm hollow shaft with a SAE J609 A-B Flange. Suitable for Honda GX390 engines. The pump has a 3/4" BSP Female inlet, M22 male outlet on the VRT3 unloader valve with a return to tank outlet, and featues an inline inlet filter, chemical injector, return to tank bypass barb and easy-prime valve.
Pump and gearbox assembly - provides 15 litres per minute at 210 Bar / 3045 Psi max pressure. Requires 9.7 Hp / 7.13 kW of power. Fits a 1" / 25.4mm hollow shaft with a SAE J609 A-B Flange. Suitable for Honda GX390 engines. The pump has a 3/4" BSP Female inlet, M22 male outlet on the VRT3 unloader valve with a return to tank outlet, and featues an inline inlet filter, chemical injector, return to tank bypass barb and easy-prime valve.
Pump and gearbox assembly - provides 21 litres per minute at 200 Bar / 2990 Psi max pressure. Requires 10.9 Hp / 8.13 kW of power. Fits a 1" / 25.4mm hollow shaft with a SAE J609 A-B Flange. Suitable for Honda GX390K1QX engines. The pump has a 3/4" BSP Female inlet, M22 Male outlet on the VRT3 unloader valve with a return to tank outlet, and featues an inline inlet filter and easy-prime valve.
Pump and gearbox assembly - provides 21 litres per minute at 200 Bar / 2990 Psi max pressure. Requires 10.9 Hp / 8.13 kW of power. Fits a 1" / 25.4mm hollow shaft with a SAE J609 A-B Flange. Suitable for Honda GX390 engines. The pump has a 3/4" BSP Female inlet, M22 Male outlet on the VRT3 unloader valve with a return to tank outlet, and featues an inline inlet filter and easy-prime valve.
Pump and gearbox assembly - provides 15 litres per minute at 200 Bar / 2990 Psi max pressure. Requires 7.5 Hp / 5.5 kW of power. Fits a 1" / 25.4mm hollow shaft with a SAE J609 A-B Flange. Suitable for Honda GX340 engines. The pump has a 3/4" BSP Female inlet, M22 Male outlet on the VRT3 unloader valve with a return to tank outlet, and featues an inline inlet filter and easy-prime valve.