Detachable Honda GX35-powered unit (1.6 Hp) clamps instantly onto any length aluminium beam from 2 m to 6 m+. Reversible beam profile gives a perfect rounded edge for free/wet screeding one way, or a sharp 90° edge for striking off formwork the other. 83 Hz vibration, 75 mm compaction depth, only 19.5 kg total weight, 3.75 m/sec² hand-arm vibration, no pack, no hoses, no hydraulics, just fill and go. One power unit, every beam length, both screeding methods, all day long.
- Dimensions: (power unit): 630 × 440 × 1040 mm
- Weight: (power unit): 19.5 kg
- Engine: Honda GX35 4-stroke petrol
- Power: 1.6 Hp / 1.2 kW
- Frequency: 83 Hz
- Compaction depth: 75 mm
- Hand-arm vibration: 3.75 m/sec²
Twin-Handle Power Unit – Clamps to Any Beam Length
The Easy Screed’s power unit detaches in seconds and securely clamps onto aluminium beams from 2.0 m to 6.0 m (or longer with extensions). One power unit covers every size on site, eliminating the need for multiple dedicated screed units per beam length and reducing kit weight and cost.
Reversible Beam Profile – Free Screed or Strike-Off in One Tool
The specially shaped aluminium beam presents a rounded edge when mounted one way for wet/free screeding directly on plastic or insulation, then flips 180° to give a sharp 90° edge for striking off level with traditional timber or steel formwork. No second tool required.
Honda GX35 4-Stroke Power – Reliable and Serviceable
Powered by the industry-standard GX35 Honda petrol engine (1.6 Hp / 1.2 kW), the unit starts first pull and runs all day on a small tank. Genuine Honda parts are available worldwide, keeping downtime to an absolute minimum.
High-Frequency Vibration – Proper Compaction, Every Pass
Operating at 83 Hz (5000 vpm) with 3.75 m/sec² hand-arm vibration, the Easy Screed vibration delivers a consistent 75 mm compaction depth in standard sand-cement floor screeds while remaining well below daily exposure limits for prolonged use.
No Hydraulics, No Hoses, No Pack – Pure Mechanical Simplicity
Unlike hydraulic or air-powered screeds, the Easy Screed needs no power pack, no flow or pressure settings, and no trailing hoses. Just fuel up, clamp on, and screed. Transport weight of the power unit is only 19.5 kg and fits easily in any van.
Please see optional extras for beams - Larger sizes available upon request
