The Outland Tools WD300 is a 300 kg chain-driven 4WD petrol power barrow with skid-steer turning. Powered by a 200 cc Rato engine, it climbs 20° slopes and fits through 73 cm gates. Three forward gears reach 3.6 km/h; manual skip tips 125 L loads in one motion. 2-year domestic warranty (1-year commercial) with optional pre-assembly.
- Engine: 4-stroke petrol, 200 cc, 3,600 rpm
- Drive: Chain-driven 4WD
- Gears: 3 forward, 1 reverse
- Max speeds: 3.6 km/h forward, 1.2 km/h reverse
- Ground clearance: 100 mm
- Climb angle: 20°
- Weight: 160 kg
- Payload: 300 kg
- Skip volume: 125 L
- Overall dimensions: (L x W x H) 1327 × 740 × 1038 mm
- Warranty: 2 years domestic, 1 year commercial (registration required)
Chain-Driven 4WD Grip
The WD300 uses a chain-driven system to power all four wheels, delivering direct torque without the slippage common in belt or friction drives. This setup maintains traction on loose gravel, wet clay, or icy patches, letting the barrow climb 20° slopes and push through soft ground where wheeled alternatives stall.
Skid-Steer Zero-Turn Maneuver
A skid-steer layout drives left and right wheels independently, enabling the machine to pivot in its own length. No three-point turns or manual lifting are needed; counter-rotate the wheels and the barrow spins on the spot, ideal for tight corners between raised beds or narrow site entrances.
300 kg Steel Skip
The skip is built from folded steel plate with a 125 L volume and a flat load floor. It holds 300 kg of sand, rubble, or logs without deformation. A manual tip latch releases the load in one motion; the box returns to level on its own.
73 cm Pass-Through Width
At 730 mm wide, the WD300 clears standard garden gates and 750 mm doorways. The compact frame keeps the center of gravity low, so the barrow remains stable when fully loaded on side slopes or uneven paths.
Rato 200 cc Four-Stroke Engine
A 200 cc Rato petrol engine runs at 3,600 rpm and starts with a recoil pull. Three forward gears top out at 3.6 km/h; reverse is 1.2 km/h. The engine drives the chain system directly, with no separate hydraulic pump to service.
Ready-to-Work Assembly Option
The barrow ships partially assembled; handles, skip latch, and throttle cable need bolting on. Select the pre-build option at checkout and the machine arrives fully assembled, fueled, and tested, cutting setup time to zero.
