The Sherpa STT400 is a tough 400 kg / 10 cu ft polyethylene dump trailer that tows behind any ride-on mower or ATV, then converts in seconds to a stable push-along barrow with a swivelling front caster. A simple foot lever tips the bed cleanly, while large 15/6.00-6 pneumatic turf tyres roll easily over grass without rutting. Built from UV-stable plastic on a steel frame, it’s light enough to manoeuvre by hand yet strong enough for daily heavy work around gardens, stables or small holdings.
- Load Capacity: 400 kg (881 lbs)
- Volume: 10 cu ft (283 litres) heaped
- Body Material: UV-stabilised heavy-duty polyethylene
- Tyres: 4 × 15/6.00-6 pneumatic turf tread
- Dimensions (towing): 168 × 94 × 71 cm (L×W×H)
- Empty Weight: 39 kg
Heavy-Duty Polyethylene Body Construction
The Sherpa STT400 trailer bed is moulded from thick, UV-stabilised polyethylene that resists cracking, rusting and denting. The one-piece bed measures 168 cm long × 94 cm wide × 71 cm high and weighs 39 kg empty.
400 kg Load Rating with 10 cu ft Heaped Volume
Official payload is 400 kg (881 lbs). When heaped, the bed holds 10 cubic feet (approximately 283 litres) of material before spilling over the sides.
Dual-Mode: Tow Behind or Push Barrow
A removable front panel and fold-down tow bar convert the trailer from ride-on mower/ATV towing mode to a walk-behind barrow in seconds, no tools required. A front caster wheel automatically engages in barrow mode for 360° steering.
Lever-Operated Dump Bed
A single foot lever at the rear lifts the bed to a 45° angle for complete emptying of loose or heavy loads. The hinge mechanism is reinforced steel with greaseable pivot points.
Pneumatic 15/6.00-6 Turf Tyres
Four 15-inch diameter tyres with 6.00-6 wide turf tread run at low pressure to reduce ground compaction. Maximum towing speed is 8 km/h (5 mph).
