The Target Power TB35-1 generator is powered by a 4-cylinder, 2.3-liter turbocharged diesel engine providing a gross output of 30 kWm Prime Power or 33 kWm Emergency Standby Power at 1500 RPM. The system features a mechanical fuel pump managed by an electronic governor and a cooling package engineered for high-ambient temperatures up to 50°C. For consistent reliability, the unit includes a 12V electrical system and maintains high fuel efficiency with a consumption rate of 7.6 L/hr at 100% prime load.
- Power Capability: Delivers a Prime Power (PRP) of 30 kWm and an Emergency Standby Power (ESP) of 33 kWm at 1500 RPM.
- Engine Configuration: A 2.3L, 4-cylinder in-line diesel engine featuring turbocharged aspiration and a 17.5:1 compression ratio.
- Fuel Efficiency: Consumes 7.6 L/hr at 100% PRP, with an electronic governor ensuring precise delivery.
- Thermal Management: Equipped with a mechanical radiator and belt-driven pusher fan designed for ambient temperatures up to 50°C.
- Robust Lubrication: Features a total system capacity of 11.5 liters with a dedicated oil flow rate of 22 L/min.
- Starting Reliability: Utilizes a 12Vdc electrical system with a 3.7 kW starter, capable of unassisted starts down to -5°C.
High-Efficiency Powertrain Architecture
The heart of this unit is a 2.3-liter, 4-cylinder diesel engine featuring a turbocharged aspiration system. Designed with an in-line cylinder arrangement and a 17.5:1 compression ratio, the engine utilizes a direct injection system and a mechanical fuel pump to ensure reliable power delivery. This mechanical foundation is built for durability, featuring a robust SAE 3 flywheel housing and a liquid-cooling system that utilizes a 50% antifreeze mixture.
Versatile Power Ratings and Performance
This engine is engineered to meet two primary operational standards: Prime Power (PRP) and Emergency Standby Power (ESP). At 1500 RPM, it delivers a continuous PRP of 30 kWm, with a 10% overload capability available for one hour in every 12-hour period. For critical failures, the ESP rating provides 33 kWm. To maintain long-term reliability, the average load factor over any 24-hour period should not exceed 70% of the respective power rating.
- Target Power TB35-1
- 30 kVA Prime / 35 kVA Standby
- Single Phase, with sockets
- Baudouin 4M06G35/5 Engine. 2 year warranty.
- DataKom, ComAp Or Deep Sea Electronics
- Silenced Generator (Insulated Canopy)
- Complete with Standby Kit, Ideal for home, business back-up and powering equipment
- 2 Year Standby Warranty
Precision Fuel and Lubrication Management
Fuel efficiency is optimized across various loads, consuming 7.6 L/hr at 100% PRP and dropping to 4 L/hr at 50% PRP. The system is managed by an electronic governor to maintain steady speeds, supported by a fuel supply flow of 40.2 L/hr. The lubrication system is equally robust, featuring an 11.5-liter total capacity and an oil flow rate of 22 L/min, ensuring that even at an idle speed, the oil pressure remains at or above 1 Bar.
Integrated Cooling and Airflow Engineering
The cooling package is designed for high-ambient environments, capable of operating in temperatures up to 50°C. It utilizes a mechanical, belt-driven pusher fan that generates an airflow of 48 m³/min. The air intake system is designed for minimal restriction, featuring a clean filter restriction limit of ≤35 mBar. For exhaust management, the system handles a flow of 6.48 m³/min at ESP while maintaining a maximum back pressure of 80 mBar.
Electrical and Cold-Start Specifications
The unit operates on a 12Vdc negative-to-ground electrical system, powered by a 3.7 kW starter motor. For battery maintenance, it includes a charger with a 55A current output. The engine is capable of starting in temperatures as low as -5°C without assistance, or -15°C when equipped with an auxiliary starting device. For emergency applications requiring an immediate start under load, the installation of coolant heaters is recommended to maintain constant circulation across all components.
